Welcome to Amica Pharma

VTD (Vaccum Tray Dryer)

Top Seller

A Vacuum Tray Dryer works under vacuum conditions on the conduction principle. Inside the dryer are several shelves having trays on which the products are placed. The top most shelf is a dummy shelf placed there to ensure proper heating and to prevent the dried powder from escaping into the solvent extraction system. The shelves are constructed hollow with baffles cum stiffeners placed in between shelves. Every shelf has an inlet and outlet nozzle and is connected to an inlet and outlet header through these nozzles.

A hot medium reaches the shelf through the inlet header and flows through the shelves in a uniformly zig-zag pattern ensuring faster heat transfer to the surface. This in tam heats up the trays on the shelves. The hot medium flows out from the shelf through the outlet header.

The inlet and outlet headers are designed in such a way that the now of the heating medium is equally distributed into each of the shelves. The dryer chamber is constructed from heavy-duty plates to prevent the plates from buckling during th vacuum operation. Additional limpet coils are provided in order to further stiffen the body and to pass on the hot medium. The chamber is provided with a heavy door and adequate locking arrangement. The dryer chamber is connected to a shell & tube by means of a vapour column to a Heat Exchanger. This in turn is connected to a condensate receiver.

Vacuum is applied to the condensate receiver. Vapour evolved during the drying process collects in the receiver after it is cooled in the heat exchanger. The vapour to be cooled is passed through the tube side of the Heat Exchanger, while cooling water is passed through the shell side. A cooling coil in the condensate receiver cools any vapours entering the receiver before it goes into the vacuum pump. The condensate receiver is connected to a vacuum trap to make sure that any uncooled vapours from the receiver get trapped thus minimising the vapour content entering the vacuum pump.

Sparkler Filter Press

Best Seller

We among the most trusted firms, indulge in manufacturing, supplying and exporting Sparkler Filter Press. Used in several industries like Pharmaceutical Industries , Chemical Industries , Oil Industries , Juice Industries etc. these products are made using quality material and latest technology. Our Sparkler Filter Press is also thoroughly checked by expert quality controllers on various parameters to ensure flawlessness. We further conduct regular researches for improvising these products.
WORK:The liquid is directed with the help of pumps through the centre channel of the cartridge from the bottom of the body. Suspended particles get retained on the fitter medium resting on the filter plates and the clear filtrate emerges from the side holes of the plates inside the tank and flows out from the bottom outlet. The filter tank does not come into contact with the liquids and hence remains clean. The cake filtrates and solids remain completely inside the fully closed filter plate cartridge. Complete recovery of the filtrate is possible by passing of air or an inert gas through the bottom inlet to dry the cakes and get a clean empty tank.
Features:• Enclosed construction.
• Cake holding capacity.
• High production rate.

• Model (APFP) - 8" ,  14" , 18" , 24" , 33" 

Vibro Sifter

Featured Item

FEATURES:
• cGMP Model with contact parts in SS 316. & Non Contact Parts in SS 304.
• Amplitude of Vibratory Motion adjustable through movable eccentric weight.
• SS 316 Hood with 200 mm dia Nozzle for dust free charging of Powders.
• The machine can easily be dismantled, cleaned & assemble through quick opening SS 316 clamps.
• Portable mounted on sturdy Castor Wheels. The Vibrating assembly is isolated by rugged springs.
• Finish: Inside - Mirror Polish
               Outside - Mirror Polish
• The machine is designed to be totally dust free.
• Provision of a vent.
• Independent Jacks for lifting the machine off the floor for effective sifting.
• Dust free docking station for loading and Unloading.
• Silicon Bonded Integrated Mesh.
• SS Operating panel designed for all safety.
• CE Certified.
• Silicon Balls for Lump Breaking & Mech cleaning.

CAPACITY:
• 50 Kgs. - 400 kgs per hour
Model (inches) : 12, 20, 24, 30, 36, 48, 60,72

Octagonal Blender

New Addition

An octagonal blender is a slow tumbling machine especially designed to perform mixing and lubrication of dry powders and granules for tablets and capsules formulations. The advantage of this octagonal shape blender is slow tumbling action, which while rotating does not degrade the particle structure. The special design is also suitable for dust-free operations as it can be used with attachment of dedicated bin charging and discharging systems. The ideal fill level of octagonal blender is two third of the total volume of the cylinder. It is widely accepted tumbling blender in pharmaceutical, food, chemical and cosmetic industries.

Our octagonal blenders are available at factory price for supply all India and overseas with full service installation and superior after sales service. We manufacture both lab scale octagonal blenders and for pharmaceutical production line. Octagonal Blenders above capacities from 300 kg are fully customized and made to order. Each unit confirms GMP requirements and fitted with instruments that make your work user friendly.

High grade stainless steel (304 / 316) is used to construct the machine. Customization is an integral part of our company; we facilitate our customers with advantage of customization on the basis of provided specifications.

- Emergency stop buttonOptional- Intensifier bar
- Paddle type baffles
- PLC with touch panel
- Trolley
- Variable speed drive
- Vacuum loading system
- Customized discharge height
- Moisture spray system
- Safety railings
- Explosion proof motors
- Validation documents